Sheffield Leyland 1/8" Parting Tool (CH500)

Separating a finished project from waste wood requires a narrow blade that minimizes material loss. This 1/8" parting tool plunges cleanly into spinning stock with minimal friction, making it an essential shop tool for every project. It is also the ideal choice for cutting precise sizing grooves when matching spindle diameters, allowing for consistent results across a production run.

Features

• Narrow 1/8" Profile - conserves valuable wood and reduces cutting friction during deep plunge cuts.
• Straight Edge Geometry - cuts clean, square grooves for sizing or complete part separation.

Specifications

• Size: 1/8" (3.17 mm)
• Tool Type: Parting Tool
• Supplier Part Number: CH500
• KMS Product Code: SLI-CH500

Common Shop Applications

• Cutting tenons and sizing grooves for fitment.
• Final separation of the project from the lathe waste blocks.

Recommended Shop Add-Ons

• Most turners also grab: Outside Calipers - Use in conjunction with the parting tool to set exact tenon diameters.
• You'll also need: Diamond File - Perfect for a quick edge touch-up right at the lathe without removing the tool.

Frequently Asked Questions

Q: Does this tool catch easily? A: When kept sharp and used with light pressure, it is very stable. Always widen the kerf on very deep cuts to prevent the blade from binding.

Q: Is this a diamond-profile parting tool? A: This model has parallel sides. For deep cuts, it is recommended to pull the tool slightly left and right to clear its own kerf.