Magnum 5/8 HP 3000 PSI Electric Airless Paint Sprayer (RP8620 120V)
Painting large exterior walls or finishing long stretches of fencing requires equipment that can move serious volume without stopping. The Magnum electric airless paint sprayer features a 5/8 HP motor that delivers up to 3,000 PSI of pressure to atomize thick latex paints, varnishes, and lacquers. Weighing under 19 pounds, this lightweight setup is easy to move around the jobsite and relies on industrial-grade tungsten carbide valves to handle the abrasive nature of heavy coatings.
Features
- High-pressure metal spray gun - features a die-cast aluminum housing for long-lasting durability on the jobsite.
- Industrial-grade tungsten carbide valves and seals - withstand the abrasive wear of heavy latex paints and thick coatings.
- In-line spray gun filter - traps dried paint chunks and debris before they reach the tip to prevent frustrating clogs.
- 25-foot high-pressure hose - provides plenty of reach so you don't have to constantly reposition the pump unit.
- Replaceable 517 spray tip - delivers a wide 250 to 310 mm spray pattern ideal for broad surfaces like walls and siding.
Specifications
- Motor size: 5/8 HP (650 W)
- Voltage: 120V / 60Hz / 7A
- Maximum pressure: 3,000 PSI (206.8 bar)
- Flow rate: 1.1 L/min
- Standard nozzle size: 517
- Spraying width: 9.8 - 12.2 Inch (250 - 310 mm)
- Hose length: 25 ft (7.6 m)
- Weight: 18.7 lbs (8.5 kg)
- Supplier Part Number: RP8620 120V
- KMS Product Code: MAG-ALSYS100
Recommended Shop Add-Ons
- You'll also need: Airless Spray Gun Filters - keeps your tips clear by catching debris before it ruins your spray pattern.
- Most painters also grab: Pump Armor Storage Fluid - prevents internal corrosion and freezing when storing the unit between jobs.
Frequently Asked Questions
Do I need to thin my latex paint before spraying?Thanks to the 3,000 PSI pump, most premium un-thinned latex paints can be sprayed directly from the bucket, saving you prep time.
How do I clean this unit after using water-based paints?Simply cycle warm soapy water through the intake hose and pump system until the fluid exiting the spray gun runs completely clear.