Magnum 1/2 Inch 2 Flute HSS End Mill (EM12F2)
Eliminate chip buildup during high-speed plunging and heavy slotting operations in non-ferrous metals. The Magnum 1/2 Inch 2 Flute HSS End Mill is optimized for machining aluminum and mild steels, featuring large flute areas that permit high feed rates by ejecting chips quickly. The High-Speed Steel construction offers excellent fracture toughness, making it a reliable choice for manual mill setups where cutting conditions vary, while the center-cutting capability allows for direct vertical plunge cuts into the workpiece.
Features
- Large flute area - permits high feed rates by ejecting chips quickly to prevent tool clogging.
- Center-cutting capability - designed for both vertical plunge entry and horizontal traverse milling.
- Versatile HSS substrate - resists chipping and failure under interrupted cut conditions in manual setups.
Specifications
- Diameter: 1/2" (12.7 mm)
- Material: High-Speed Steel (HSS)
- Flute Count: 2
- Style: Slotting/Plunging
- Supplier Part Number: 720-1043
- KMS Product Code: MAG-EM12F2
Common Shop Applications
- Vertical plunging and pocketing in aluminum and plastics.
- General purpose slotting in mild steel fabrication.
Recommended Shop Add-Ons
- You'll also need: 1/2 Inch End Mill Holder - required to mount this tool in your mill.
- Most machinists also grab: Aerosol Cutting Coolant - helps prevent aluminum chips from welding to the tool.
Frequently Asked Questions
Q: Can I use this on a standard drill press? A: No, end mills require the lateral stability of a milling machine and should never be used in a drill press chuck.
Q: What is the maximum depth I can cut? A: Standard depth is usually 1.5 to 2 times the tool diameter; check your specific machine rigidity for deep slots.