please wait
email a friend Email a Friend

MiterSet Standard Mitre Gauge Jig MPP753STD-3

Reg. $109.99
$89.95
Save $20
  • SKU: MTR-MPP753STD3
  • Model: MPP753STD-3
  • ✓ In Stock Online
  • Manufactured by: MiterSet
Qty: Click here for gift cards!
Location
Qty
Coquitlam
3
Abbotsford
2
Langley
2
Chilliwack
2
Kelowna
2
Victoria
3
Kamloops
2
Calgary
3
Grande Prairie
2
Edmonton
3
Red Deer
2

close popup

Cutting mitre joints on a table saw can be hard. A standard mitre gauge just doesn't offer the precision required to set accurate angles. More often than not you end up with annoying gaps, time spent sanding and wasted material.

Now you can combine the MiterSet Standard mitre gauge jig with your mitre gauge. The MiterSet Standard quickly and easily sets your mitre gauge to precise angles for cutting perfect mitre joints every time.

MiterSet Standard is an aluminum plate bisected by a standard 3/4" mitre gauge slot. It has hole patterns for setting left and right angles up to 52.5°.

The number pattern on each plate sector represents 5° on your mitre gauge. Slide your mitre gauge into the mitre slot. Place one pin at 00 and the other pin in the numbered hole that represents the degree angle you want to cut—right or left. Now slide your mitre gauge against the two pins and lock it down. It's that simple. Your mitre gauge will now cut perfect mitre joints. No gaps. No sanding. No waste!

The detent bar is notched from .5° to 2.5° in .5° increments. Place the detent bar against the pins and allow the detent bar to recess against the angle that you would like to cut. For example, when the pin is set at 20 degrees and the detent bar is set at 2.5 degrees the total angle is 22.5 degrees. Slide your mitre gauge against the detent bar and lock it down.

MiterSet Standard includes an aluminum plate with a 2 mm neoprene rubber backing, aluminum detent bar, two tapered pins and a protective carrying case.

  • CNC milled from a solid aluminum billet
  • Hole placement is accurate to 1/1000th of an inch yielding beautiful, tight joints for up to 20 wood segments
  • Electronic anodization protects from oxidation
  • Laser-etched hole numbers provide years of readability
  • 2 mm neoprene rubber backer secures the jig on flat surfaces
  • Foam-filled plastic case protects MiterSet between uses
  • Made in USA
  • Specifications:
  • Product: MiterSet Standard mitre gauge jig
  • Dimensions (l x w x h): 5.875" x 5.875" x 0.625"
  • Product weight: 2 lbs
  • Shipping weight: 3.95 lbs
  • This MiterSet jig is not compatible with the Dewalt 745 and 748 contractor table saws. These saws use a bar with an inverted T-shape and it will not fit the mitre slot within the plate
  • This MiterSet jig is not configured to support Shopsmith
  • MiterSet is designed to be used with a standard mitre gauge; it does not work with some of the large precision gauges from Incra and Kreg
loading image
Write Review
Be the first to write a review!