please wait
email a friend Email a Friend

Miller Millermatic 190 MIG Welder 907613

Reg. $1,399.99
Add To Cart For Price
Save
  • SKU: MEM-907613
  • Model: 907613
  • Limited Qty Online
  • Manufactured by: Miller
Qty: Click here for gift cards!
Location
Qty
Coquitlam
Sold Out
Abbotsford
Sold Out
Langley
Sold Out
Chilliwack
1
Kelowna
Sold Out
Victoria
1
Kamloops
Sold Out
Calgary
Sold Out
Grande Prairie
Sold Out
Edmonton
Sold Out
Red Deer
Sold Out

close popup

A lighter and simpler Millermatic to set-up and start welding. This all-in-one 190 Amp wire welder is built with Miller's inverter technology which allows it to keep all of its best-in-class features while reducing the weight of the machine to 35 lbs,making it easier than ever to move around your workspace. The Millermatic 190 uses 240 volt input power which is enough power to tackle any size job and an arc that's extremely forgiving to variations in arc length and travel speeds. The machine is perfect for light fabrication, maintenance & repair, auto body, farm/home and even vocational training.

On top of that, the portable 190 features the control known as Auto-Set™, that automatically sets your welder to the proper parameters eliminating any guesswork & making this a great welder for beginners or seasoned pros. Simply set the wire diameter, then the material thickness and start welding. Additionally, it has a manual mode to give you flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.

Other features:

Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.

Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.

Auto Spoolgun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

Fan-On-Demand™ is a fan that operates when needed reducing noise and power consumption.

Smooth-Start™ provides a smooth, spatter-free start. It is the best-starting machine in the small MIG machine category.

Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.

'Tip Saver' Short Circuit Protection shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.

  • Processes: MIG (GMAW), Flux-Cored (FCAW)
  • Welds 24 ga. - 5/16 in. (0.8-7.9mm) mild steel
  • Input power: 240V, 21.7 Amps, 60 Hz
  • Rated output: 40% duty cycle, 140 Amps @ 21VDC
  • Welding Amperage Range : 30 - 190 Amps
  • Max Open Circuit Voltage: 45
  • Wire Speed : 60 - 600 IPM (1.5 - 15.2 m/min)
  • Wire Diameter Capacity: .024 - .035 in (0.6 - 1.2 mm) Solid Steel, .024 - .035 in (0.6 - 1.2 mm) Stainless, .030 - .035 in (0.8 - 1.2 mm) Flux Cored
  • Max Spool Size Capacity : 8 in (203 mm)
  • Machine Net Weight: 35lb (15.9 kg)
  • Uses 4 or 8 in spools (102 or 203 mm)
  • Compatible with optional Spoolmate 100 series spoolgun MEM-300371
  • Warranty: Miller True Blue Warranty
  • Included:
  • Power source
  • 6.5-ft. (2 m) power cord with plug
  • 10-ft. (3 m), M-100 MIG gun and cable assembly
  • 10-ft. (3 m) work cable with clamp
  • Argon and AR/CO2 mix flow gauge regulator with gas hose
  • Hobart® spool of .030-in. (0.8 mm) solid wire
  • Two contact tips for .030-in. (0.8 mm) wire
  • Quick Select™ drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
  • Material thickness gauge #229 895
  • Velcro cord wraps
  • Click PDF icon to download feature / spec sheet MEM-907612
loading image
Write Review
Be the first to write a review!