General International Deluxe 18" Heavy Duty Wood Cutting Ba

Share:
  • SKU: GEN-90290M1
  • Model: 90-290M1
  • Please call 1-800-567-8979 for availability
  • Manufactured by: General International

Reg. $3,299.99
$2,399.97Save $900

Qty:
  • |
  • |
  • Heavy-duty one-piece frame, designed for added stability. Requires no further assembly.
  • Dynamically balanced cast-iron wheels with replaceable rubber tires,mounted on heavyduty bearings.
  • Solid cast-iron table with heavy-duty onepiece trunnion and 0-45° right tilting action for bevel cuts.
  • Upper and lower dual bakelite block and 5 bearing, deluxe blade guide system, with 10 points of contact.
  • 2 cutting speeds for excellent results in either hard or soft woods.
  • Convenient blade tension adjustment handwheel with tension scale.
  • Safety foot brake simultaneously slows down the blade and disconnects electrical circuit for quick blade stoppage and emergency shut-off.
  • Powerful, totally enclosed fan cooled (TEFC) industrial quality motor.
  • Magnetic safety switch with lock-out switch key to prevent unauthorized use.
  • Cast-iron miter gauge and dual miter slots in table for stable cross cuts on either side of the blade.
  • Deluxe Excalibur bandsaw rip fence system with curved guide block and a 6” wooden resaw auxiliary fence.
  • Onboard storage mounts for miter gauge and rip fence.
  • Short cut-off feed device keeps fingers safely away from the blade.
  • Wheel size: 18” (458 mm)
  • Wheel speeds (2): 600/840 RPM
  • Maximum blade width: 1 1?4” (32 mm)
  • Minimum blade width: 1?4” (6 mm)
  • Blade length: 145 5/8” (3700 mm)
  • Blade speeds: 2820 & 3936 Lin. FPM (860/1200 Lin. MPM)
  • Table size: 24” x 20” (610 x 510 mm)
  • Table tilt: 0° TO 45° (RIGHT)
  • Table height: 37 3?8” (950 mm)
  • Maximum width of cut: 17 5/8” (450 mm)
  • Maximum cutting (rip fence): 16” (405 mm)
  • Maximum depth of cut: 12 3/8” (315 mm)
  • Dust collection ports: 2 x 4'' (102 mm)
  • Base dimensions (L x W): 18 1/8” x 32 1/4” (460 x 820 mm)
  • Height: 74 3/8” (1890 mm)
  • Motor M1: 3 HP, 220 V, 1PH, 16 A
Write Review
Be the first to write a review!